Advertisement
Quick Links
Advertisement
Related Manuals for Maxxus Multipress 9.1
Summary of Contents for Maxxus Multipress 9.1
- Page 1 Multipress 9.1...
- Page 2 Maxxus Group GmbH & Co. KG. Errors, colour and technical modification subject to change, reproduction as well as electronic duplication only with written permission of MAXXUS Group GmbH & Co. KG.
-
Page 3: Safety Instructions
Any manipulation of or interference with the device can cause damage to the device and be a danger to people. If you have any questions or queries contact your specialist dealer or the MAXXUS Service Team and they will be... - Page 4 Assembly - Multipress Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are bulky and heavy. Check that all the parts and fixing materials (screws, nuts, etc.) have been delivered. Assemble the parts carefully as any damages or defects occurring due to mistakes made at the time of assembly are not covered by the warranty or guarantee.
- Page 5 Assembly - Multipress Spare parts of installation step Product name Qty. Product name Qty. External hexagon screw： Main frame assembly-R M10*75 External hexagon screw： Main frame assembly-L M10*100 External hexagon anti-proof Rear base connection assembly screw：M10 Pull-up assembly Flat washer ：φ10 Pull-up joint reinforced piece Arced washer ：φ10 Step 2...
- Page 6 Assembly - Multipress Step 3 Spare parts of installation step Product name Qty. Product name Qty. Mid vertical support assembly External hexagon screw：M10*20 Flat washer ：φ10...
- Page 7 Assembly - Multipress Step 4 Spare parts of installation step Product name Qty. Product name Qty. Middle top connection assembly External hexagon screw：M10*20 Flat washer ：φ10...
- Page 8 Assembly - Multipress Step 5 Spare parts of installation step Product name Qty. Product name Qty. Shock-absorbing pad Guide pole assembly External hexagon screw：M10*20 Flat washer ：φ10...
- Page 9 Assembly - Multipress Step 6 Be careful not to pretend backwards. Spare parts of installation step Product name Qty. Product name Qty. Rear barbell securing assembly...
- Page 10 Assembly - Multipress Step 7 Spare parts of installation step Product name Qty. Product name Qty. Rear top guide bar securing assembly External hexagon screw：M10*20 External hexagon screw：M10*90 Flat washer ：φ10...
- Page 11 Assembly - Multipress Step 8 As shown in the figure, unscrew the screw by using the 4# L-type inner hexagon wrench ,then assemble Rear barbell pole assembly（No.11） and lock it well by using 4# L-type inner hexagon wrench . Spare parts of installation step Product name Qty.
- Page 12 Assembly - Multipress Step 9 Spare parts of installation step Product name Product name Qty. Qty. External hexagon anti-proof Rear double pulley mounting assembly screw：M10 Flat washer ：φ10 External hexagon screw：M10*60...
- Page 13 Assembly - Multipress Step 10 Note: First, it requires two people work together when install this step. Put spare part on a flat floor. Second,pay attention to the linear bearings inside when assembling Squat guide bar（No.19）and Squat bar assembly（No.22）. Third，pay attention to the direction of the close-up accessories .Do not install reverse.
- Page 14 Assembly - Multipress Step 11 As shown in the picture, install No.18 and lock it with screw by using the 4# inner hexagon wrench . (This screw is pre-locked on No. 18 ). Note: 1: Two people are required to install this step .Please hole two ends of the hand guide rod at the same time in the direction of the above picture and install No.17 that installed in step 11 to main frame.
- Page 15 Assembly - Multipress Step 12 50 63 Spare parts of installation step Product name Qty. Product name Qty. Chest clamping assembly External hexagon screw：M10*20 Flat washer ：φ10...
- Page 16 Assembly - Multipress Step 13 Spare parts of installation step Product name Qty. Product name Qty. Chest clamping aluminum Chest clamping assembly-R decorated fixed cover Inner hexagon pan head Chest clamping assembly-L screw：M10*20...
- Page 17 Assembly - Multipress Step 14 Spare parts of installation step Product name Qty. Product name Qty. Back cushion Inner hexagon pan head screw： M8*60 Flat washer ：φ8...
- Page 18 Assembly - Multipress Step 15 Spare parts of installation step Product name Qty. Product name Qty. Swing U-shaped support assembly External hexagon screw：M10*75 External hexagon anti-proof screw：M10 Flat washer ：φ10...
- Page 19 Assembly - Multipress Step 16 Spare parts of installation step Product name Qty. Product name Qty. External hexagon anti-proof Swing U-shaped support assembly screw：M10 Flat washer ：φ10 External hexagon screw：M10*75...
- Page 20 Assembly - Multipress Step 17 Spare parts of installation step Product name Qty. Product name Qty. Barbell fixed wire rope...
- Page 21 Assembly - Multipress Step 18 37 54 Spare parts of installation step Product name Qty. Qty. Product name External hexagon screw： Pulley assembly M10*70 External hexagon anti-proof Barbell fixed wire rope screw：M10 Pulley Flat washer ：φ10 Powder metallurgy shaft sleeve Rear movable Pulley External hexagon screw：M10*45...
- Page 22 Assembly - Multipress Step 19 Spare parts of installation step Product name Qty. Product name Qty. Side barbell support bar External hexagon screw：M10*20 Flat washer ：φ10...
- Page 23 Assembly - Multipress Step 20 52 63 35 63 61 52 63 35 63 61 52 63 35 63 61 Spare parts of installation step Product name Qty. Product name Qty. External hexagon anti-proof Cross pulley U assembly screw：M10 Chest clamping wire rope Flat washer ：φ10 Pulley External hexagon screw：M10*45...
- Page 24 Assembly - Multipress Step 21 Spare parts of installation step Product name Qty. Product name Qty. Low draw wire rope Gourd hook External hexagon screw： Short chain M10*30 External hexagon anti-proof Wire rope fixing U-shaped support screw：M10 Wire rope collision ball...
- Page 25 Assembly - Multipress Step 22 Note: 2-1, 2-2, 2-3 and 2-4 are preinstalled on Main frame assembly-L（No.2）. First，unlock spare parts 2-1, 2-2, 2-3 and 2-4 as shown in the figure with wrench. Then ，install them on Flyer wire rope（No.33）and lock them well with wrench .
- Page 26 Assembly - Multipress Step 23 Spare parts of installation step Product name Qty. Product name Qty. External hexagon screw： Side barbell support bar M10*20 50 Spring clamp Flat washer ：φ10...
- Page 27 Assembly - Multipress Step 24 Spare parts of installation step Product name Qty. Product name Qty. External hexagon anti-proof The Olympic rod fixing frame screw：M10 External hexagon screw：M10*70 Flat washer ：φ10...
- Page 28 Assembly - Multipress Step 25 Spare parts of installation step Product name Qty. Product name Qty. 50 Spring clamp Long chain Low pull handlebars Gourd hook Gun barrel...
- Page 29 Assembly - Multipress Step 26 Spare parts of installation step Product name Qty. Product name Qty. Safety support Single section pull Hook leg foam assembly Long chain Double rod assembly-L Gourd hook Double rod assembly-R T-shaped bolt...
- Page 30 Parts List – Multipress Product name Diagram Qty. Main frame assembly-R Main frame assembly-L Rear base connection assembly Pull-up assembly Pull-up joint reinforced piece Rear foot tube assembly Mid vertical support assembly Shock-absorbing pad Guide pole assembly...
- Page 31 Parts List – Multipress Product name Diagram Qty. Rear barbell securing assembly Rear barbell pole assembly Middle top connection assembly Rear top guide bar securing assembly Chest clamping securing assembly Chest clamping assembly-R Chest clamping assembly-L Chest clamping aluminum decorated fixed cover Squat guide bar fixed T sleeve assembly...
- Page 32 Parts List – Multipress Product name Diagram Qty. Squat guide bar Safety support assembly-L Safety support assembly-R Squat bar assembly Pulley assembly Cross pulley U assembly Swing U-shaped support assembly Side barbell support bar The Olympic rod fixing frame...
- Page 33 Parts List – Multipress Product name Diagram Qty. Rowing baffle assembly Rear double pulley mounting assembly Barbell fixed wire rope （L=2290mm） Low draw wire rope （L=3705mm） Chest clamping wire rope （L=3195mm） Flyer wire rope （L=10510mm） Back cushion Pulley 50 Spring clamp...
- Page 34 Parts List – Multipress Product name Diagram Qty. Powder metallurgy shaft sleeve Low pull handlebars Safety support Hook leg foam assembly Double rod assembly-L Double rod assembly-R Single section pull Gun barrel Long chain...
- Page 35 Parts List – Multipress Product name Diagram Qty. Short chain Wire rope fixing U- shaped support Wire rope collision ball Gourd hook External hexagon screw （M10*20） External hexagon screw （M10*30） External hexagon screw （M10*45） External hexagon screw （M10*60） External hexagon screw （M10*70）...
- Page 36 Parts List – Multipress Product name Diagram Qty. External hexagon screw （M10*75） External hexagon screw （M10*90） External hexagon screw （M10*100） Inner hexagon pan head screw （M8*60） Inner hexagon pan head screw （M10*20） T-shaped bolt External hexagon anti-proof screw （M10） Flat washer φ8 Flat washer φ10...
- Page 37 Parts List – Multipress Product name Diagram Qty. Arced washer φ10 Rear movable Pulley Open-ended wrench （14#/17#） L-type inner hexagon wrench （4#） L-type inner hexagon wrench （5#） L-type inner hexagon wrench （8#）...
- Page 38 Training Bench...
- Page 39 Scope of Delivery - Bench Part No. Name Illustration Quantity Main frame Arm curl post Swivel bracket with weight plate holder Shaft tube Rear foot Front foot Front post Handle...
- Page 40 Scope of Delivery - Bench Part No. Name Illustration Quantity Arm curl pad Seat pad Backrest cushion Foam roller Foam tube Cover plate, outer opening Cover plate, inner opening T-shaped knob...
- Page 41 Assembly - Bench Assembly Step 1: Assembly Step 2:...
- Page 42 Assembly - Bench Assembly Step 3: Assembly Step 4:...
- Page 43 Assembly - Bench Assembly Step 5: Assembly Step 6:...
- Page 44 Assembly - Bench Assembly Step 7: Assembly Step 8:...
- Page 45 Assembly - Bench Assembly Step 9: Assembly Step 10:...
- Page 46 Exploded View - Bench...
- Page 47 Teileliste - Bank Name Part No. At l...
-
Page 48: Recommended Accessories
Alternatively, you can use the MAXXUS® degreaser spray (optionally available). After this, dry the guide pipes off thoroughly and lubricate them with MAXXUS®... -
Page 49: Training Recommendations
Training Recommendations Preparation Before Training Before you start training make sure that not only your training device is in perfect condition, your body must also be pre- pared for training. Therefore, if you have not done any endurance training for some time, you should consult your GP and undergo a fitness check-up. - Page 50 Training recommendations Intake of Liquids The intake of sufficient liquids before and during training is vital. During a 60-minute training session it is possible to lose up to 0.5 litres of liquid. To compensate for this loss, you can drink a mix of one third apple juice to two thirds water to replace all electrolytes and min- erals which your body loses through sweat.
-
Page 51: Warranty
The warranty period for your training device starts on the date of purchase and applies solely to products which were purchased directly from the MAXXUS Group GmbH & Co. KG, or one of the MAXXUS Group GmbH & Co. KG direct and authorised distribution partners. - Page 52 Notes...
-
Page 53: Device Details
I accept the General Terms and Conditions of MAXXUS® Group GmbH & Co. KG. I hereby instruct the company MAXXUS® Group GmbH & Co. KG to repair the above defects. In Warranty cases I will not be charged for the cost. The costs for repairs which are excluded from liability for defects in quality will be charged to me and must be settled immediately. - Page 54 Maxxus Group GmbH & Co. KG Nordring 80 D-64521 Gross-Gerau Germany E-mail: info@maxxus.de www.maxxus.com...