Performing A System Recovery - HP EliteBook 720 G1 Maintenance And Service Manual

NOTE:
for backup reduces the number of recovery discs required.
● When backing up to discs, number each disc before inserting it into the external drive.
To create a backup using Backup and Restore:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of the computer.
1. Select Start > All Programs > Maintenance > Backup and Restore.
2. Follow the on-screen instructions to set up your backup, create a system image (select models only), or
create a system repair disc (select models only).

Performing a system recovery

In case of system failure or instability, the computer provides the following tools to recover your files:
● Windows recovery tools: You can use Windows Backup and Restore to recover information you have
previously backed up. You can also use Windows Startup Repair to fix problems that might prevent
Windows from starting correctly.
● f11 recovery tools: You can use the
image includes the Windows operating system and software programs installed at the factory.
NOTE: If you are unable to boot (start up) your computer and you cannot use the system repair discs you
previously created (select models only), you must purchase a Windows 7 operating system DVD to reboot the
computer and repair the operating system. For additional information, see
operating system DVD (purchased separately) on page
NOTE: Your computer may not come equipped with an internal optical drive. In order to use the
operating system DVD, you may need to plug in an external optical drive.
146 Chapter 9 Backup and recovery
DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them
f11 recovery tools to recover your original hard drive image. The
149.
Using a Windows 7