Table of Contents
Advertisement
Display assembly
NOTE:
The TouchScreen display assembly is spared as a whole unit replacement. The non-TouchScreen
display assembly is spared at the subcomponent level only. For more display assembly spare part
information, see the individual removal subsections.
Description
12.5-in, AntiGlare, FHD, LED, UWVA, TouchScreen display assembly for use only on computer models
equipped with an AMD processor
12.5-in, AntiGlare, HD, LED, UWVA, TouchScreen display assembly for use only on computer models
equipped with an Intel processor
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
a.
Battery (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the display assembly:
1.
Release the display panel cable from the routing clips (1) and channel built into the base enclosure.
Service cover on page
Battery on page
69)
Hard drive on page
71)
Keyboard on page
81)
Top cover on page
89)
67), and then remove the following components:
Component replacement procedures
Spare part number
765606-001
761781-001
93
Advertisement
Table of Contents
