HP EliteBook 720 G1 Maintenance And Service Manual page 107

a. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
b. Remove the display bezel (4).
The display bezel is available using the following spare part numbers:
● 775896-001–For use only on computer models equipped with an AMD processor and an
AntiGlare, FHD, LED, UWVA display panel
● 766012-001–For use only on computer models equipped with an AMD processor and an
AntiGlare, HD, LED, SVA display panel
● 730544-001–For use only on computer models equipped with an Intel processor and an
AntiGlare, HD, LED, SVA display panel
6. If it is necessary to replace the display panel:
a. Remove the six Phillips PM2.0×3.25 screws (1) that secure the display panel to the
display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b. Lift the top edge of the display panel (2) and swing it up and forward until it rests upside down in
front of the display enclosure.
Component replacement procedures 95