Advertisement
Quick Links
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing the enclosure. The installation is
best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if
conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature
prior to installation.
1. Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
2. Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips:
"
"
"
"
Snap Studs ------------------------------- 11 each (1 extra)
If any parts are damaged or missing please contact customer service at (800) 213-7981.
3510-1 Port Jacksonville Pkwy, Jacksonville, FL 32226
800-213-7981
Instructions for Installation and Care of
Honda Pioneer 1000-2 Soft Door Kit
HO-10002-SDK01
"
"
"
"
"
"
"
"
"
"
"
"
Soft Doors
16 each------------3"
2 each------------5"
2 each------------6"
2 each------------8"
Advertisement
Related Manuals for FALCON RIDGE HO-10002-SDK01
Summary of Contents for FALCON RIDGE HO-10002-SDK01
- Page 1 Instructions for Installation and Care of Honda Pioneer 1000-2 Soft Door Kit HO-10002-SDK01 Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable. Be sure to read these instructions thoroughly before opening and installing the enclosure. The installation is best done when the temperature is 70 degrees F.
- Page 2 3. Begin by placing the 5", 6" and 8" adhesive Velcro strips in their place. The pictures below show where they go.
- Page 3 4. Next hold the door up to the frame and attach these spots then continue attaching it using the double- sided Velcro strips sewn perpendicular to the edge of the door. At each of the double-sided strips take one of the 3" adhesive Velcro strips and adhere it to the inside of the frame. Then wrap the double-sided strip around it so that the adhesive strip holds it firmly in place.
- Page 4 Cab to either extreme hot or cold temperatures when storing. 3. A special cleaner conditioner is available from Falcon Ridge that will greatly increase the service life of the Cab Enclosure. In addition, if additional hook and loop sets are needed, they can also be ordered.
-
Page 5: Return Policy
Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge’s many distributors, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition.