Arctic cat prowler 2012 to present full cab fits poly windshield (9 pages)
Summary of Contents for FALCON RIDGE CF-1000-WD05
Page 1
Instructions for Installation and Care of CF Moto U-Force 1000 Full Aero-Vent Polycarbonate Windshield CF-1000-WD05 / 50-40065 NOTICE: Please check contents of package for any damage and make sure all parts fit correctly and you are happy with the product before removing protective film. Once the film is removed you cannot return the product for a full refund.
Page 2
3. Before placing the windshield on the vehicle install the ½” wide adhesive rubber padding down the sides and across the top of the vehicles roll cage. See Photo Below. 4. Next take the two vent slider and install then to the inside surface of the windshield. Start by installing the handle first.
Page 3
5. Then place the sliders on the windshield so that the pointed ends are facing towards the outside edges. Place the plastic slide fasteners into the slots on the sliders and into the holes on the windshield to finish installation. See the photo on the next page. 6.
Page 4
7. Enjoy, and remember- when cleaning the windshield do so gently at first with warm water and mild detergent to dislodge any grit that may scratch the Polycarbonate. After rinsing and drying with a soft cloth, you may then polish the windshield with an appropriate commercially available plastic polish,...
Page 5
Falcon Ridge. This will ensure many seasons of clarity and keep scratching and swirling to a minimum. Never use cleaners such as Windex that contain ammonia as doing so may adversely affect the windshield. Thank You for your purchase!
Warranty To The Owner of this Product: Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer’s warranty. 30 Day Warranty which includes and is not limited to replacing the enclosure, tops and/or windshield due to defect of the product.