Rubber Hoses Check - Kohler KDI 1903M Owner's Manual

INFORMATION ABOUT MAINTENANCE

5.7 Rubber hoses check

Danger
• For safety precautions see
The check is carried out by exerting a slight deflection or bending along
the pipe and near the hose clamps. Components must be replaced if
they have clear signs of cracks, tears, cuts, leaks and do not retain a
certain degree of elasticity.
Important
• Before proceeding with operation, read
• If hoses are damaged contact an authorized KOHLER
workshop.
1. Loosen the four capscrews E and remove guard F.
2. Check that the:
• Fuel system hoses A are intact.
•
Hoses for the cooling circuit B1 and B2.
• To access the control of the cooling hoses B1 unscrew the
four screws E and remove the safe guard F.
• Vent system pipes C.
Air system ducts D.
When the control is finished the safe guard F mount and tighten the four
screws E.
Internal Communication: For internal & partner use only.
Chap. 3.
Par. 3.2.2.
5
Fig 5.7
31
EN