D6 Camera Daughter Board; Key Feature And Block Diagram; Figure 4-4. D6 Camera Board; Figure 4-5. Block Diagram Of D6 Camera Board - MEDIATEK Genio 700 EVK User Manual

4.2

D6 Camera Daughter Board

The D6 camera Board has two MIPI CSI paths, one connecting directly with the processor (MT8390) on the main board,
and another connecting with the main board through an ISP (On-Semiconductor AP1302CSSL00SMGA0-DR). These two
MIPI paths are switched by a MIPI multiplexer (TI TS3DV642RUARQ1).
4.2.1

Key Feature and Block Diagram

Support 4-Lane MIPI CSI Interface and connect with main board through a 36 pin Gold-Finger
•
Supports camera module with/without ISP (On-Semiconductor AP1302CSSL00SMGA0-DR)
•
8M pixel camera modules (VF08001 with ON-Semiconductor CMOS image sensor AR0830)
•
Since there is only one CSI interface from the main board, the D6 Board can support two camera modules, with ISP
•
and without ISP, switched by a MIPI multiplexer (TI TS3DV642RUARQ1)
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.

Figure 4-4. D6 Camera Board

17 18
SCL5/SDA5
I2C_A
CSI0
MIPI_A
SCL0/SDA0
CSI0 TS3DV642Q1
MUX
SCL5/SDA5
I2C_B
1 34
MIPI_B
S0 H
ISP
AP1302
17 18
S1
SCL1/SDA1
CSI1
1 34
V_3V3_D6
V_1V0_D6
VIN
BUCK
FP6381
EN
V_3V3_D6
V_1V05_D6
VIN
BUCK
FP6381
EN

Figure 4-5. Block Diagram of D6 Camera Board

SCL5/SDA5
I2C_A
MIPI_A
CSI
TS3DV642Q1
MUX
I2C_B
CSI1
MIPI_B
V_3V3_D6
V_2V7_D6
VIN
LDO
FP6186
EN
V_3V3_D6
V_2V8_D6
VIN
LDO
FP6186
EN
V_3V3_D6
V_1V8_D6
VIN
LDO
FP6186
EN
V_3V3_D6
V_1V2_D6
VIN
BUCK
FP6381
EN
Genio 700 EVK
Genio 700 Evaluation Kit User Guide
27