Table of Contents
Advertisement
3.2.4
Raspberry Pi Power 3V3
Before using the Raspberry Pi like connector, the J4201 need to plug a Jumper to get power.
Current Rating
0.3 Ampere
Auto Power On by plugin of AC Adaptor
3.2.5
Before using Auto Power On function by plugin of AC adaptor, the J3001 need to plug a Jumper.
Current Rating
0.1 Ampere
Figure 3-6. Jumper Selection for Auto Power on by plugin of Adapter
3.3
I/O Interface
LED Indicators
There are four LED indicators.
LED Indicators
System Power Indicator
Reset Indicator
System On Indicator
Charging Status Indicator
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Figure 3-5. Jumper Selection for Raspberry Pi Power 3V3 Input
Auto Power On by plugin of AC Adaptor
Table 3-2. LED Indicators
Location Color
D1002
D3200
D1003
D1001
Raspberry Pi Power 3V3
Green LED is on when system power in.
Green LED is on when reset key is pressed.
Green LED is on when system is on.
Red LED is on while charging.
Genio 700 Evaluation Kit User Guide
Note
Genio 700 EVK
18
Advertisement
Table of Contents
