Configure D6 Camera Board; Table 4-3. Configure D6 Camera Board - MEDIATEK Genio 700 EVK User Manual

4.2.2

Configure D6 Camera Board

MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Schematic

Table 4-3. Configure D6 Camera Board

Description
(1) Jumper@1-2 : ISP I2C address = 0x7A
(2) Jumper@2-3 : ISP I2C address = 0x78
(1) Jumper@1-2 : Test Mode
(2) Jumper@2-3 : Normal
(1) Jumper@ 1-2 : ISP Mode
(2) Jumper@ 2-3 : Bypass Mode
(1) Jumper@ 1-2 : ISP Mode
(2) Jumper@ 2-3 : Bypass Mode
(1) Jumper@ J13.1-J13.2 : VDD = 1.05V
(2) Jumper@ J13.2-J13.3 : VDD = 1.2V
(3) Jumper@ J12.1-J13.2 : VDD = 1.0V
(4) Jumper@ J14.1-J13.2 : VDD = 1.8V
Number of data lanes can be set according to
the resistors table in the left picture.
Genio 700 EVK
Genio 700 Evaluation Kit User Guide
28