Sign Into The Linkit Smart 7688 Development Board's Web Ui - MEDIATEK LinkIt Smart 7688 Get Started Manual

Step 2: Install PuTTY (For Windows only)
PuTTY provides you with the system console environment using Secure Socket Shell (SSH) access to the
development board's operating system.
Step 3: Install Bonjour Print Service (For Windows 7 only)
The LinkIt Smart 7688 development board uses mylinkit.local as its local domain name. In Windows 7,
you'll need to install the Bonjour print service
discover the LinkIt Smart 7688's IP address within the local domain. For Windows 8 and later, Mac OS X and
Linux, mDNS is supported and you can use mylinkit.local without additional software.
If you are using a virtual machine, please note that mDNS may have problems reaching the guest OS network. In
this case, please use the host OS browser for the next step – sign into the board's Web UI.
1.2.

Sign into the LinkIt Smart 7688 development board's Web UI

Now power up your board, connect a USB power source or your PC to it and open the board's Web UI, which
you'll use in subsequent steps to configure your board.
To complete this section you'll:
•
Power up your board
•
Search for LinkIt_Smart_7688_XXXXXX AP (XXXXXX is the MAC address) and connect the board
through Wi-Fi
•
Sign into the LinkIt Smart 7688 Web UI
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Get Started Guide
because mDNS is not supported. This helps your computer
© 2015 MediaTek Inc.
This document contains information that is proprietary to MediaTek Inc.
Page 2 of 15