Software
6
Genio 700 EVK is supported by two different software stacks: Android and Yocto. The pre-installed software for Genio
•
700 EVK is Android.
Another software stack, IoT Yocto, is also provided as a separate download. The following sections describe how to
•
build, get, and flash the images for Android and Yocto system respectively.
6.1
Android
6.1.1
Android Software Project and Configuration
How to get Android Software Image
6.1.2
Please contact with your VAR, Distributor, Mediatek FAE.
Android Software Image Flash method
6.1.3
Following steps can reflash the system codes of Genio 700 EVK board.
1.
Connect ADB port to PC via Micro USB (CON480)
2.
Execute MediaTek Flash Tool
3.
Select the proper Download-XML file
4.
Select the download mode ("Firmware Upgrade" is preferred.)
5.
Start download by pressing the button of "Download"
6.
Plug in the DC power cord , the downloader will start
Note:
If the downloader does not start.
Press Download button and plug in the DC power cord will execute a force download.
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Table 6-1. Android Project name and Configuration
Project Name
AIOT8390P5_64_BSP
AIOT8390P6_64_BSP
Genio 700 Evaluation Kit User Guide
Configuration
IoT EVK+MT7663
IoT EVK+MT7921
Genio 700 EVK
31