Genio 700 EVK
Genio 700 Evaluation Kit User Guide
2.8
EVK Debug
• Micro USB (CN3200)output UART log
• Please install FT232RL driver
Figure 2-3. Debug Port
• Check PC USB port could recognize the UART device
• Setting serial line (ex. COM57 ) , serial speed to 921600, choose connection type to serial and press OPEN on putty for
Log (Example on Putty)
Figure 2-4. UART port setting
Figure 2-5. Log (For reference)
14
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.