Hdmi Port How To Switch Between Dpi And Ethernet Interfaces; Antenna Connector; Table 3-8. Sma Antenna - MEDIATEK Genio 700 EVK User Manual

3.13

HDMI Port How to Switch between DPI and Ethernet Interfaces

Genio 700 EVK board provides an HDMI port, users can connect external displays. The HDMI encoder of the processors
MT8390 generate HDMITX format data base on HDMI Specification 2.0b. which support max. frequency up to 594Mhz
(4096x2160p@60Hz 8-bit mode)
The HDMI port also supports HPD, EDID, HDCP2.3 and 3D HDMI function.
3.14

Antenna Connector

Genio 700 EVK board has three SMA connector. Users can connect them via SMA antenna. At First, three IPEX RF cables
must be connected to WiFi module and IPEX Connector (CON4000, CON4001 and CON4002). These antennas are designed
for AzueWave M.2 (MT7921L) WiFi module.
Location
J4002
J4003
J4004
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.

Table 3-8. SMA Antenna

Band
2.4GHz / 5GHz
2.4GHz / 5GHz
2.4GHz / 5GHz
Genio 700 Evaluation Kit User Guide
Note
WiFi / BT
WiFi / BT
WiFi / BT
Genio 700 EVK
23