4
Camera Sub-Board
The camera sub-board has two MIPI CSI paths, one connects with the processor (MT8365) on main board
directly, the other connects with the main board through an ISP (On-Semiconductor AP1302CSSL00SMGA0-
DR). These two MIPI paths are switched by a MIPI multiplexer (TI TS3DV642RUARQ1).
4.1
Feature
4-Lane MIPI CSI Interface
•
Connects the main board with an SAS SFF-8087 cable.
•
Supports camera module with/without ISP (On-Semiconductor AP1302CSSL00SMGA0-DR)
•
Since main board has two CSI interfaces, there are two camera sub-board and two APPLETEC 4M pixel
•
camera modules (AP-CM-54-4.0-70 with ON-Semiconductor CMOS image sensor AR0430) in the package.
Camera Sub-Board Block Diagram
4.2
MediaTek Proprietary and
Confidential
Figure 4-1 Camera Sub-Board
Figure 4-2 Block Diagram of Camera Sub-Board
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in
part, is strictly prohibited.
Genio 350 Evaluation Kit Hardware User Guide
Genio 350 EVK
Unclassified
Page 21 of 24