Key Feature And Block Diagram; D6 Camera Daughter Board; Figure 4-2 Block Diagram Of D2 Camera Dtb; Figure 4-3 D6 Camera Dtb - MEDIATEK Genio 1200 User Manual

4.1.1

Key Feature and Block Diagram

Support 4-Lane MIPI CSI Interface and connect with main board through a 36 pin Gold-Finger.
•
Integrate a 1.0V LDO circuit for camera digital power supply, a 2.8V LDO circuit for camera analog power supply and a
•
1.8V LDO circuit for camera I/O power supply.
4.2

D6 Camera Daughter Board

The D6 camera DTB has two MIPI CSI paths, one connecting directly with the processor (MT8395) on the main board, and
another connecting with the main board through an ISP (On-Semiconductor AP1302CSSL00SMGA0-DR). These two MIPI
paths are switched by a MIPI multiplexer (TI TS3DV642RUARQ1).
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Place
I2C5
Bottom Layer
30
1
MIPI_4LAN
MAINCAM_RST
MAINCAM_MCK
16
15
V_CAM_2V8_D2
AXE530127
V_CAM_1V8_D2
V_CAM_1V0_D2
VDD_3.3V_D2
V_CAM_1V0_D2
LDO VIN
CAM0_DVDD_EN_D2
FP6186
EN
VDD_3.3V_D2
V_CAM_1V8_D2
LDO VIN
CAM1_DVDD_EN_D2
FP6186
EN
VDD_3.3V_D2
V_CAM_2V8_D2
LDO VIN
FP6186 CAM0_AVDD28_EN_D2
EN

Figure 4-2 Block Diagram of D2 Camera DTB

Figure 4-3 D6 Camera DTB

Genio 1200 EVK
Genio 1200 Evaluation Kit User Guide
31