Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified Table of Contents Overview ..............................5 General Information .......................... 5 Architecture and Block Diagram ......................5 Feature Summary ..........................6 Introduction ..............................7 CPU (MT8365) ........................... 8 Power Management IC (MT6357) ..................... 8 DRAM (Micron MT53E768M32D4DT-053) ..................
Genio 350 Evaluation Kit Hardware User Guide Unclassified Overview General Information Genio 350-EVK is an evaluation kit of MediaTek Genio 350 platform, integrated with WiFi, Bluetooth, FM, and GPS, is a high performance IoT platform with rich features. Architecture and Block Diagram Vol+ Key...
Genio 350 Evaluation Kit Hardware User Guide Unclassified Introduction Genio 350-EVK integrates MediaTek MT8365 processor, LPDDR4 memory, eMMC, power Management IC (MT6357), and M.2 WiFi Module. The package contains a MIPI DSI LCD display, two camera sub-boards and one HDMI connector.
Unclassified CPU (MT8365) MediaTek Genio 350 processor integrates multi-core ARM® Cortex-A53 MPCore equipped with the NEON engine offers processing power necessary to support the latest OpenOs along with its demanding applications such as web browsing, email, GPS navigation, and games.
I2S Audio Interface • Optional On-Board WiFi Chip (MT6631) An optional on-board MediaTek MT6631 is available in development stage, supports WiFi, Bluetooth, GPS and Dual-Band (2.4 GHz and 5 GHz) Single Stream 802.11 a/b/g/n/ac RF, 20/40/80 MHz Bandwidth • Supports Worldwide Wi-Fi 5G Channels including new band in US and China (5,925 MHz), and Bluetooth •...
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified Interface and Connectors Genio 350-EVK I/O Connectors DC Jack CN1403 12V DC Input System Power Indicator D1206 Green Reset Indicator D1207 Green System Power Indicator D1001 Green Charging Status Indicator...
Page 11
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified System Power Paths There are two power supply paths for the system. One is through a buck converter (Richtek RT6276A), which convert 12V (DC Jack) to 4.2V (VSYS). This path supports those applications without Li-Polymer batteries.
Figure 3-3 Jumper Selection for System Power UART There are two UART (UART0 and UART1) consoles with USB to UART Bridge ICs on Genio 350-EVK. Users can use these consoles for debug purpose. The connectors are Micro USB type. Supports word Lengths from 5 to 8 bits with an optional parity bit and 1 or 2 stop bits •...
Page 13
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified I2C Bus Purpose Note I2C Bus Battery Charger RichTek RT9466GQW I2C0 I2C0 Raspberry Pi I/O Capacitive Touch Controller Goodix GS9271 I2C1 I2C1 HDMI Bridge IC ITE IT66121FN Camera Sub-Board (MIPI CSI0)
Genio 350-EVK has one USB Host port for USB device connection, with USB Type-A connector. Audio Interface (Earphone and Line Out) Genio 350-EVK provides a 3.5mm earphone jack (with a microphone input) and another 3.5mm audio jack for Line Out (no audio amplifier is build-in).
• 3.11 MIPI CSI Interface Genio 350-EVK provides two 4-lane CSI interfaces, the CSI interface operates up to a maximum bit rate of 1.5Gbps per lane. Camera sub-boards are connected through SAS SFF-8087 cables. 3.12 Ethernet MII and RMII Interfaces Ethernet MII/RMII interface shares some pins with HDMI interface.
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified 3.13 How to Switch between HDMI and Ethernet Interfaces DPI and Ethernet MII/RMII Interfaces share some GPIO pins. These two functions can not exist simultaneously. Reflash code and reboot system might be necessary when you switch between the interfaces. A mount of analog switch ICs (74LVC2G53) are used to switch these two interfaces.
3.14 HDMI Port Genio 350 EVK provides an HDMI port, users can connect external displays. Since HDMI signals come from the DPI interfaces of the processors (MT8365) through a bridge IC. The maximum resolution is constrained by DPI bandwidth. 1080p30 is the limitation.
Figure 3-7 Circuit for Jumpers J1303 3.16 On-Board Antenna Genio 350-EVK has three on-board antennas. Users can connect them via coaxial cables. These antennas are designed for AzueWave M.2 (MT7663) WiFi module, also can be used for MT6631 on-board WiFi chip. Location...
Figure 3-8 LCM FPC Installation 3.18 How to Power Up The System You may power on Genio 350-EVK by following steps. Connect UART0 to the computer via an USB cable. (If you want to see the logs.) Plug in the DC 12V power cord.
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified 3.20 Debug Micro USB output UART log • Please install FT232RL driver for micro-USB • Figure 3-9 Debug Port Check PC USB port could be recognized the UART device •...
Genio 350 EVK Genio 350 Evaluation Kit Hardware User Guide Unclassified Camera Sub-Board The camera sub-board has two MIPI CSI paths, one connects with the processor (MT8365) on main board directly, the other connects with the main board through an ISP (On-Semiconductor AP1302CSSL00SMGA0- DR).
Figure 5-2 MediaTek PCBA Naming Rule Disclaimer Genio 350-EVK are supplied “as is” and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty for a particular purpose. No license is granted by implication or otherwise under any patents or other intellectual property by application or use of evaluation boards.