3.7
USB Host
Genio 700 EVK board has one USB Host port (CON490) for USB device connection, with Type-C USB connector.
3.8
Audio Interface
Genio 700 EVK board provides a 3.5mm earphone jack (with a microphone input) and another 3.5mm audio jack for Line
Out (no audio amplifier is built-in).
3.9
Microphones
Genio 700 EVK board was designed with one analog microphone (Merry MMA102-004) and two digital microphones
(Merry MMD300-007).
Location
MIC2700
MIC2701
MIC2702
MIPI DSI Interface
3.10
Genio 700 EVK board provides one 4-lane MIPI DSI interface. A StarTek LCM (KD070FHFID015-C021A) with touch pad is
provided in the box. The I2C capacitive touch controller is Goodix GT9271.
• Up to 1.2Gbps for 1-Data Lane
• Pixel format of RGB565/RGB666
• Support D-PHY version 1.1
3.11
MIPI CSI Interface
Genio 700 EVK board provides two 4-lane CSI interfaces, the CSI interface operates up to a maximum bit rate of 1.5Gbps
per lane. Camera sub-boards are connected through Molex 877159006 connector.
3.12
Ethernet Interfaces
Ethernet RGMII interface shares some pins with DPI interface. Some configurations should be done before booting up.
• Operate with an external Ethernet PHY (Realtek RTL8211FI-CG)
• Dynamically configurable to support 10/100/1000M with RGMII
• Optional magic packet detection
• EEE (Energy Efficient Ethernet) MII signaling according to the IEEE 802.3az specification
• RJ-45 Ethernet connector with transformer and LEDs in it
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Table 3-7. Microphone Input
Type
Digital Microphone 1
Digital Microphone 2
Analog Microphone
Genio 700 Evaluation Kit User Guide
Note
To Processor MT8390
To Processor MT8390
To PMIC MT6365
Genio 700 EVK
22