Power And Function Key Interface; Usb Device; Usb Host; Audio Interface - MEDIATEK Genio 510 User Manual

3.5

Power and Function Key Interface

12V power supplies to the system from a 2.0mm DC Jack. Power-on button and Reset button on the evaluation-board to
turn on and reboot the system. Home and Download buttons make the operation easier.
3.6

USB Device

Genio 510 EVK board has one USB Device port (CON480), which can be used for download and ADB debug, with Micro USB
connector.
USB Ports 1
USB3.1 Gen1
USB2.0
USB Ports 2
USB2.0
3.7

USB Host

Genio 510 EVK board has one USB Host port (CON490) for USB device connection, with Type-C USB connector.
3.8

Audio Interface

Genio 510 EVK board provides a 3.5mm earphone jack (with a microphone input) and another 3.5mm audio jack for Line
Out (no audio amplifier is built-in).
3.9

Microphones

Genio 510 EVK board was designed with one analog microphone (Merry MMA102-004) and two digital microphones
(Merry MMD300-007).
Location
MIC2700
MIC2701
MIC2702
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.

Table 3-7. USB feature in Genio 510 EVK

USB Ports 0
Host mode
USB2.0 Support
SW support mode
Host mode
Support
Support
SW support mode
Host mode
Support

Table 3-8. Microphone Input

Type
Digital Microphone 1
Digital Microphone 2
Analog Microphone
SW support mode
Device mode
Support
Device mode
Not Support
Not Support
Device mode
Not Support
Note
To Processor MT8370
To Processor MT8370
To PMIC MT6365
Genio 510 EVK
Genio 510 Evaluation Kit User Guide
Remark
EVK with Hub
EVK with Hub
Remark
EVK with WIFI
23