Note:
VDD_5V power can provide 5V/2A maximum but share with Camera 、HDMI 5V output.
1.
EXT_3V3 power can deliver 3.3V/300mA but share with Audio DTB 、DP MUX and HDMI CEC.
2.
Black words are ground pins.
3.
4.
Red
words are power pins.
5.
Green
words are special function pins.
Blue
6.
words are GPIOs.
7.
Pink
words are pins, which multiplex with other function.
MicroSD Slot
3.4
Genio 700 EVK board has one MicroSD slot. It uses MT8390 MSDC1 interface and supports following features.
Default Speed Mode
•
High Speed Mode
•
SDR12 Mode
•
SDR25 Mode
•
SDR50 Mode
•
SDR104 Mode
•
DDR50 Mode
•
Support 1bit/4bit SD Bus Width
•
Power and Function Key Interface
3.5
12V power supplies to the system from a 2.0mm DC Jack. Power-on button and Reset button on the evaluation-board to
turn on and reboot the system. Home and Download buttons make the operation easier.
USB Device
3.6
Genio 700 EVK board has one USB Device port (CON480), which can be used for download and ADB debug, with Micro USB
connector.
3.7
USB Host
Genio 700 EVK board has one USB Host port (CON490) for USB device connection, with Type-C USB connector.
3.8
Audio Interface (Earphone and Line Out)
Genio 700 EVK board provides a 3.5mm earphone jack (with a microphone input) and another 3.5mm audio jack for Line
Out (no audio amplifier is built-in).
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Genio 700 EVK
Genio 700 EVK Hardware User Guide
18