Micro Sd Card Connector; Power And Function Key Interface; Usb Device; Usb Host - MEDIATEK Genio 1200 User Manual

3.4

Micro SD Card Connector

Genio 1200 EVK has one MicroSD connector. It uses MT8395 MSDC1 interface and supports following features.
Default Speed Mode
•
High Speed Mode
•
SDR12 Mode
•
SDR25 Mode
•
SDR50 Mode
•
SDR104 Mode
•
DDR50 Mode
•
Support 1bit/4bit SD Bus Width
•
3.5

Power and Function Key Interface

12V power supplies to the system from a 2.0 mm DC Jack. Power-on button and Reset button on the evaluation-board to
turn on and reboot the system. Home and Download buttons make the operation easier.
3.6

USB Device

Genio 1200 EVK has two USB device ports, among which the USB Type-C port can be used for ADB debugging port.
3.7

USB Host

Genio 1200 EVK has four USB host ports for USB device connections, which are two USB Type-A connectors and one USB
Type-C connector and one Micro USB connector.
USB Port 0 on SoC
USB3.2 Gen1
USB2.0
USB Port 1 on SoC
USB3.2 Gen1
USB2.0
USB Port 2 on SoC
USB2.0
USB Port 3 on SoC
USB2.0
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.

Table 3-8 USB Feature in Genio 1200 EVK

SW Support Mode
Host Mode
Support
Support
SW Support Mode
Host Mode
Support
Support
SW Support Mode
Host Mode
Support
SW Support Mode
Host Mode
Support
Function
Device Mode
Support USB Type-C
Support USB Type-C
Function
Device Mode
Not Support EVK with Hub
Not Support EVK with Hub
Function
Device Mode
Support Micro USB
Function
Device Mode
Not Support Wi-Fi Module
Genio 1200 EVK
Genio 1200 Evaluation Kit User Guide
23