How To Power Up The System; Figure 6-1 Power Up The System; Figure 6-2 Log Result Show On Screen - MEDIATEK Genio 1200 Quick Start Manual

Genio 1200 EVK
Genio 1200 Evaluation Kit Quick Start Guide
6

How to Power Up the System

Step1: Must install Camera DTB on CAM0 or CAM2 connector.
(If camera app without in Android desktop, please refer to chapter 7 Appendix of Genio 1200 EVK User Guide for fixed it)
Step2: Connect UART0 to the computer via a micro-USB cable. (If you want to see the logs)
Step3: Plug in the DC 12V power adapter.
Step4: Long press PWR button more than 3 seconds.
You will see the screen is shown on MIPI display and some trace logs in UART0.

Figure 6-1 Power Up the System

Figure 6-2 Log Result Show on Screen

10
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.