Table of Contents
Advertisement
Genio 350 EVK
Genio
350 Evaluation Kit Quick Start Guide
9
How to Power Up The System
After assembled all peripherals, now you can power on the EVK and start evaluation.
Step1: Connect UART0 to the computer via an USB cable. (If you want to see the logs.)
Step2: Plug in the DC 12V power adapter.
Step3: You will see the screen is shown on HDMI display and some trace logs in UART0.
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Page 12 of 12
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Advertisement
Table of Contents
