3M -Matic 200a Instructions And Parts List page 51

200a Adjustable Case Sealer, Type 39600
Frame Assemblies
To Order Parts:
Refer to fi rst illustration, Frame Assemblies, for the Figure Number that identifi es a specifi c portion of the
1.
machine.
Refer to the appropriate Figure or Figures to determine the parts required and the parts reference number.
2.
The Parts List that follows each illustration, includes the Reference Number, Part Number and Part
3.
Description for the parts on that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, if desired.
4. Order parts by Part Number, Part Description and Quantity required. Also include the model/machine name,
machine type, and serial number that are located on the identifi cation plate.
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information" for
5.
replacement parts ordering information.
Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are
available only on special order. Contact 3M/Tape Dispenser Parts to confi rm item availability.
Options and Accessories
For additional information on the options and accessories listed below, contact your 3M Representative.
Part Number
70-0064-2997-4
78-8069-3983-7
78-8069-3924-1
70-0064-0353-2
70-0064-0354-0
70-0064-3000-6
78-8060-8476-6
200a-NA
Option/Accessory
Box Hold Down Attachment, Model 39600
Caster Kit Attachment
Conveyor Extension Attachment
AccuGlide™ 2+ STD 2 Inch Upper Taping Head, Type 10500
AccuGlide™ 2+ STD 2 Inch Lower Taping Head, Type 10500
Compression Roller Kit
Tool and Parts Kit
41
2011 June