Specifications - 3M -Matic 200a Instructions And Parts List

Specifications

1. Tape:
For use with Scotch
2. Tape Width:
36mm or 1-1/2 inches minimum to 48mm [2 inches] maximum.
3. Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4. Tape Application Leg Length - Standard:
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")
5. Box Size Capacities:
For use with center seam regular slotted containers.
Minimum
Length – 150mm [6 inches]
Height – 120mm [4-3/4 inches] (most "3M-Matic" Case Sealers)
90mm [3-1/2 inches] (with optional 2 inch leg length)
Width – 115mm [4-1/2 inches]
When upper and lower taping heads are used on "3M-Matic" case sealers, refer to the respective instruction
manual specifi cations for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.40m/s [80FPM] maximum.
7. Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
8. Taping Head Dimensions:
Length – 457mm [18 inches]
Height – 560mm [22 inches]
Width – 105mm [4-1/8 inches] (without mounting spacers)
Weight – Packaged:
Unpackaged: 6.7kg [15 lbs.]
2+ STD 2" Taping Head - NA
pressure-sensitive fi lm box sealing tapes.
®
Maximum
(with tape drum)
7.7kg [17 lbs.]
® fi lm tapes.)
(Specifi cations continued on next page.)
6
Unlimited
Limited by
Case Sealer
2011 December