CS170-Q370/C246/H310
► Advanced
The Advanced menu allows you to configure your system for basic operation. Some entries are
defaults required by the system board, while others, if enabled, will improve the performance
of your system or let you set some features according to your preference.
Important:
Setting incorrect field values may cause the system to malfunction.
Chapter 3 - BIOS Settings
RC ACPI Settings
Configure power management related settings in this page.
Wake system from S5 via RTC
When Enabled, the system will automatically power up at a designated time every day from
the Real-time clock (RTC) battery. More settings will be displayed once it's switched to [En-
abled] as detailed in the next page.
State After G3
Select between S0 State, Last State, and S5 State. This field is used to specify what state the
system is set to return to when power is re-applied after a power failure (G3 state).
32
www.dfi.com