Initial Connection: Cannot Find Gateway After Changing Ip Address; Initial Connection: Cannot Find Gateway Using Secondary Ethernet Port; Initial Connection: Cannot Log Into The Gateway; Ams Wireless Configurator: Gateway Does Not Appear In Ams Wireless Configurator - Emerson Rosemount 1410S Reference Manual

Troubleshooting
December 2023
6.3 Initial connection: Cannot find Gateway after
changing IP address
Possible cause: Incorrect IP address
Recommended actions
6.4 Initial connection: Cannot find Gateway using
secondary Ethernet port
Possible cause: Incorrect IP address
Recommended actions
6.5

Initial connection: Cannot log into the Gateway

Possible cause: Incorrect credentials
Recommended actions
6.6 AMS Wireless Configurator: Gateway does not
appear in AMS Wireless Configurator
Possible cause: Wireless network interface configuration
Recommended actions
46
1. Verify the IP address of the PC/laptop is in the same subnet range as the
Gateway (i.e. If Gateway IP address is 155.177.0.xxx, then PC/laptop IP address
should be 155.177.0.yyy).
2. Consider resetting the gateway to factory defaults.
1. Verify which Ethernet port is being used on the Gateway.
2. Verify the Gateway IP address (default primary port is 192.168.1.10, default
secondary port is 192.168.2.10).
3. Verify the IP address of the PC/laptop is in the same subnet range as the
Gateway (i.e. If Gateway IP address is 155.177.0.xxx, then PC/laptop IP address
should be 155.177.0.yyy).
4. Verify this option was ordered with the Gateway.
1. Verify the user name and password (administrator user name is "admin",
default password is "default").
2. If unable to connect, consider resetting the Gateway.
1. Verify the Security Setup Utility is installed on the same PC as AMS Wireless
Configurator.
2. Setup a wireless network interface using the Network Configuration application.
3. Verify the wireless network interface is configured for secure Gateway
communications.
Reference Manual
00809-0600-4410
Emerson.com