Table of Contents
Advertisement
Network – VPN
General Network Settings
Network – General Network Settings
LLDP
Turn on/off LLDP on the GAC2570. If turned on, the GAC2570 will be able to
discover the LAN policies as set up on the switch side to obtain network settings
such as VLAN tag, Layer 2 QoS 802.1p priority, and Layer 3 QoS in a plug-and-
play manner.
LLDP TX Interval (seconds)
Specifies the time interval, in seconds, between successive LLDP-MED
transmission cycles
Applied to the Second Layer of Data QoS 802.1Q/VLAN (Ethernet)
This field contains the value used for layer 2 VLAN tagging for the Ethernet
network.
The Default value is 0.
Applied to the Second Layer of Data QoS 802.1p/VLAN (Ethernet)
This assigns the priority value of the Layer 2 QoS packets on the Ethernet
Network.
The Default value is 0.
Layer 3 SIP QoS
This field defines the layer 3 QoS parameter for SIP packets.
This is the value used for IP Precedence, Diff-Serv, or MPLS. The Default value is
26.
Layer 3 Audio QoS
This field defines the layer 3 QoS parameter for audio packets. This is the value
used for IP Precedence, Diff-Serv, or MPLS. The Default value is 46.
Proxy Settings
For some network setups, it is required to connect to the Internet via a proxy
server. Manually configure "HTTP/HTTPS Proxy hostname", "HTTP/HTTPS Proxy
port" and "Bypass proxy for" in proxy settings for the device to get an Internet
connection successfully.
Advertisement
Table of Contents
