Table of Contents
Advertisement
Advanced – Syslog
Syslog Level: Select the level of logging for Syslog. The default setting is
"None". There are 4 levels: DEBUG, INFO, WARNING, and ERROR.
System Log Protocol: Select the protocol of Syslog (UDP or SSL/TLS).
Syslog Server Address: The URL/IP address for the Syslog server. If the
GAC2570 has a network connection, the GAC2570 will send the Syslog
packets to this server address.
System Log Keyword Filter: Only send the Syslog with the keyword, multiple
keywords are separated by a comma. Example: set the filter keyword to "SIP"
to filter the SIP log.
System Security
Advanced – System Security
Disable Web Login: This disables web GUI access.
Developer Mode. To enable/disable developer mode.
Revoke Debugging Authorizations. To Revoke access to debugging from all
computers previously authorized
Factory Reset. Restore default settings.
GETTING TO KNOW GAC2570
Use the Touchscreen
When the GAC2570 boots up, the LCD HOME screen will display as below. A
registered account is shown in the following figure and users might need to
register their own account to have the account status displayed.
The Status Bar shows time, network connectivity, signal strength, notification
information, etc...
GAC2570 Default Home Screen
Advertisement
Table of Contents
