Add Group - Grandstream Networks GAC2570 User Manual

Add Group

Open Contacts and tap on Group, then New Group, and enter the name of the
group.
GAC2570 Contacts – Add New Group
Add Contacts to Group
To add contacts to a group, tap on the group then tap "Add Contact" , check the
contacts to be added to the group and press
Notes:
Users could also select a group for the contact when adding or editing the
contact.
Ringtones can be assigned in a group as well as a single contact. If the
group has a ringtone set to "Custom Ringtone", this ringtone has the
highest priority when there is an incoming call to the contact.
DETECTION
The Detection section provides visual information about the device's interfaces
connection, Network and
Accounts status. Users can also perform an Audio diagnostic test to check if the
built-in speaker and Microphones are working.
Proceed from LCD Menu �� Settings
General Detection:
Port & Network Status
.
�� Status �� Detection.