System Diagnosis - Grandstream Networks GAC2570 User Manual

PNP URL
PNP (3CX) Auto Provision
Advanced Settings
Send HTTP Basic Authentication By
Default
Enable SIP NOTIFY Authentication
Enabled Authentication Server
Validation
CA Certificate
User Certificate
Factory Reset
Safe Mode

System Diagnosis

Syslog
Syslog Protocol
to allow itself to be discovered and
configured by the SIP platform. The
default setting is "Yes". Note: Reboot to
take effect.
Configures the PNP file server URL.
Users should input transport protocol in
URL such as HTTP/HTTPS/TFTP. You
could also set the device to be the file
server. The format is
http://192.168.121.111/pnp. In this case,
you have to copy your cfg file to the
device /sdcard/pnp directory.
If enabled, the GAC2570 will send
SUBSCRIBE request for an automatic
assigned URL to the multicast address in
LAN when bootup to accomplish
automatic configuration of SIP account, It
requires 3CX server support.
Determine whether to send basic HTTP
authentication information to the server by
default when using wget to download
firmware or config file.
If set to "Yes", send HTTP/HTTPS user
name and password no matter whether the
server needs authentication or not.
If set to "No", only send HTTP/HTTPS
user name and password when the server
needs authentication.
Enables the SIP NOTIFY Authentication
on the device.
If set to "Yes", the GAC2570 will
challenge NOTIFY with 401.
The default setting is "Yes".
Configures whether to validate the server
certificate when downloading the
firmware/config file.
If set to "Yes", the device downloads
firmware/configuration files only from
servers validated by CA certificates.
The default setting is "No".
Select the CA certificate for server
verification.
Press "Manage" to upload custom CA.
Select the user certificate to be used for
mutual server authentication. If the private
key is included, upload it with the user
certificate.
Press "Manage" to upload the User
Certificate.
Resets the device to the default factory
setting mode.
Configures Enable/Disable Safe Mode. If
enabled, the GAC2570 will enter safe
mode after rebooting, which will help
remote troubleshoot when an abnormal
situation occurs.
Note: Once entering safe mode, only the
system applications will be up and
running, all widgets and 3rd party apps
will be disabled. It requires a reboot to
take effect.
Select the transport protocol over which
log messages will be carried.