Operating The Batec Handbike / User Guide; Delivery; Unpacking; Elevation, Transport And Storage - BATEC MINI 2 User Manual Lines

4. OPERATING THE HANDBIKE BATEC ELECTRIC /
USER GUIDE

4.1. DELIVERY

Your ne HANDBIKE BATEC ELECTRIC
order to prevent damage during transport, parts that must be assembled later,
like the battery, are packaged separately inside the cardboard box.

4.2. UNPACKING

• Check that the outside of the cardboard box hasn t been damaged in any ay
during transport.
• Remove all of the packing materials.
• Remove the parts of the HANDBIKE BATEC ELECTRIC (including the battery and
charger) from the cardboard box and check that they are all there.
• Check that all the parts are in proper conditions,
scratches, tears, dents, irregularities or other defects.
• If you find any problems, or if any pieces are missing, notify the authorised dis-
tributor immediately.

4.3. ELEVATION, TRANSPORT AND STORAGE

The HANDBIKE BATEC ELECTRIC has been designed so that users can easily re-
move and detach the battery on their o n.
• hen taking the HANDBIKE BATEC ELECTRIC on any means of transport (car,
bus, train, plane, etc.),
journey: turn the battery key to OPEN, remove the key and then remove the
battery.
• hen lifting the HANDBIKE BATEC ELECTRIC, e recommend removing the eight
as indicated in section 3.10 and the battery as per section 4.9.1.
• When transporting the HANDBIKE BATEC ELECTRIC in the boot of a vehicle, we
recommend leaving it attached to a heelchair henever possible.
The BATEC HANDBIKE is not designed to be used as a means of transport inside
a vehicle.
The HANDBIKE BATEC ELECTRIC ELECTRIC should be stored in a cool, dry place,
protected from direct sunlight and rain. It should not be kept out of use for more
than t o months.
ill be delivered in a cardboard box. In
e recommend removing the battery before your
– 15 –
ithout any sort of damage,