BATEC MINI 2 User Manual Lines page 67

In order to minimise the risk of accidents and/or damage to your HANDBIKE
BATEC ELECTRIC, it is very important to have all repairs carried out by an author-
ised BATEC MOBILITY distributor.
Remember that your main source of information and help is the distributor that
delivered your HANDBIKE BATEC ELECTRIC, who can also respond to any ques-
tions regarding adjustments, maintenance and the arranty.
As you are a member of the BATEC MOBILITY Family , e encourage you to stay
in touch ith your BATEC HANBDIKE representative in order to make the most of
the product.
e propose the follo preventative maintenance plan schedule:
PREVENTATIVE MAINTENANCE PLAN SCHEDULE
TASKS
Check tyre pressure (2 bar). Check general tyre state (tread
height, rubbing, cracking, etc.) and change if necessary.
Clean Batec.
Tighten screws. ( ee figs. 48, 49, 50a)
Check brakes (covers, cables, levers, discs, etc.).
Change and/or adjust parts if necessary.
Check lubrication of cables and chains, grease if necessary.
Check transmission mechanism and coupling, grease if necessary.
ec spo e tension Visit an O cial Service entre
or Authorised Distributor if necessary.
ave Batec c ec ed b an O cial Service entre
or Authorised Distributor.
Checking tyre pressure
Make sure the tyre pressure is as recommended for each model and that there
are no irregularities on the surface.
Cleaning the HANDBIKE BATEC ELECTRIC
Clean the frame ith soap and arm ater. Use car soap or another non abra-
sive cleaning agent. Dry it carefully. Never use a pressure washer to clean it.
– 28 –
Monthly Yearly
✓
✓
✓
✓
✓
✓
✓
✓