BATEC MINI 2 User Manual Lines page 45

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 42
• Don t exceed the maximum
and any other object being carried.
• The HANDBIKE BATEC ELECTRIC isn t compatible
market. Before installing it, check the current BATEC Compatibility Table on our
ebsite (
.batec mobility.com).
• It is important to start out slo ly the first time you use your HANDBIKE BATEC
ELECTRIC in order to learn the sensations you get and become familiar ith it.
Each ne manoeuvre is a potential risk. Be particularly careful
speed.
• Choose a calm place to use your HANDBIKE BATEC ELECTRIC the first time.
• Have someone help you become familiar ith your HANDBIKE BATEC ELECTRIC.
Each ne manoeuvre can put you at risk of injury. Never use your HANDBIKE
BATEC ELECTRIC alone until you have gained the necessary skill level. When
someone is helping you, it is important for them to have read the user manual
beforehand as well.
• Safe use of the HANDBIKE BATEC ELECTRIC requires training and experience.
• The HANDBIKE BATEC ELECTRIC is a medical device classified as a technical aid for
mobility and e recommend consulting your local regulations on the circulation
of such vehicles. BATEC MOBILITY S.L. can provide you with the Declaration of
Conformity as a medical device or certification as a technical aid, if required.
• Check local la s regarding add on handbikes and heelchairs, as they may vary
depending on your location.
• Always do a safety check on your HANDBIKE BATEC ELECTRIC before each use.
To do this, check:
– Conditions of the fixed or removable axles on the rear heels of your heelchair.
– The Velcro on the seat and backrest of your wheelchair.
– Tyre pressure on your wheelchair. If it is too low, there is a greater risk of tip-
ping over and greater ear (recommended pressure for heelchair: see side
of tyre).
– HANDBIKE BATEC ELECTRIC tyre pressure (recommended pressure: 2 bar).
– Conditions of the HANDBIKE BATEC ELECTRIC frame.
– All parts, in particular any screws, are properly tightened.
– Brakes are working properly.
– Make sure that all electrical connections are in good conditions and properly
connected.
– Make sure the battery is connected.
– The HANDBIKE BATEC ELECTRIC attaches and detaches from the heelchair
properly.
eight of 110 kg. This includes the user s
– 6 –
ith all
heelchairs on the
ith turns and
eight

Advertisement

Table of Contents
loading

Related Products for BATEC MINI 2

This manual is also suitable for:

Electric 2Rapid 2Scrambler 2

Table of Contents