Yaesu FTM-500DR Operating Manual page 8

FUNC knob
Press the knob quickly to display the function menu.
Press the knob for one second or longer to display the set-up menu.
SUB DIAL knob
• The frequency of the lower band in the dual band display can be adjusted.
Press the knob to enable setting the operating band frequency in 1 MHz units.
GM key
Press this key to start the group monitor function.
Press this key for one second or longer to DG-ID number setting screen is displayed.
D/X key
The communication mode changes each time this key is pressed for a short time.
WIRES-X will start when this key is pressed for one second or longer.
S-DX key
key
Pressing each time switches between MAIN band and SUB band.
DISP key
Pressing each time switches between the frequency display and the scope display.
POWER (LOCK) Switch
Press this button for 2 seconds or longer to switch the power ON and OFF.
The key lock can be engaged or released by pressing the button quickly while the
radio is turned ON.
8