Ush And Sd-Card Reader Daughterboard; Removing The Ush And Sd-Card Reader Daughterboard - Dell NOT22422 Owner's Manual

Steps
1. Align and place the SD-card reader daugherboard into the slot on the palm-rest assembly.
2. Replace the three (M2x1.5) screws to secure the SD-card reader daugherboard to the palm-rest assembly.
3. Connect the SD-card reader daugherboard FFC cable to the connector on the SD card reader daugherboard.
4. Align and place the right speaker into the slot on the palm-rest assembly.
5. Replace the two (M1.6x1.8) screws to secure the right speaker in place.
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in

USH and SD-card reader daughterboard

Removing the USH and SD-card reader daughterboard

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
70 Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.
Before working inside your