Removing The Sd Card Reader - Dell Latitude E6410 ATG Service Manual

Hide thumbs Also See for Latitude E6410 ATG:
Table of Contents

Advertisement

Back to Removing and Replacing Parts
SD Card Reader
Dell™ Latitude™ E6410/E6410 ATG Service Manual
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the SD Card Reader

NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the
3. Remove the
4. Remove the Memory.
5. Remove the ExpressCard.
6. Remove the
7. Remove the
8. Remove the
9. Remove the
10. Remove the Latitude ON™ Flash/CMG Module.
11. Remove the
12. Remove the
13. Remove the
14. Remove the
15. Remove the
16. Remove the
17. Remove the
18. Remove the
19. Remove the
20. Disconnect the SD card reader cable from the system board.
21. Lift the 2 hooks while pulling the smart card reader to the right of the computer.
22. Remove the smart card reader from the computer.
Replacing the SD Card Reader
To replace the SD card reader, perform the above steps in reverse order.
Back to Removing and Replacing Parts
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Before Working Inside Your
ATG Port Cover
(applicable on E6410 ATG computer only).
battery
optical drive
hard drive
hinge covers
access panel
WWAN
card.
WLAN
card.
coin-cell
battery.
LED cover
keyboard
fingerprint
reader.
display
assembly.
ExpressCard
cage.
system
board.
UserManuals.info
Computer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude e6410

Table of Contents