Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Smart-card reader
Removing the smart-card reader
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the Battery.
About this task
CAUTION:
The information in this removal section is intended for authorized service technicians only.
NOTE:
The following procedure is applicable for systems shipped with a smart-card reader only.
The following images indicate the location of the smart-card reader and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
73