Speakers; Removing The Speakers - Dell NOT22422 Owner's Manual

14. Replace the two (M1.4x4) screws to secure the display FPC cover in place.
15. For systems shipped with a WLAN card, route the antenna cables through the metal clips on the system board.
16. For systems shipped with a WLAN card, connect the antenna cables to the connectors on the WLAN module.
17. For systems shipped with a WLAN card, align and place the WLAN bracket on the system board.
18. For systems shipped with a WLAN card, tighten the captive screw to secures the WLAN bracket in place.
19. For systems shipped with a GPU card, align and place the GPU card bridge on the system board.
20. For systems shipped with a GPU card, replace the four (M1.6x4.5) screws to secure the GPU card bridge in place.
21. For systems shipped with a GPU card, align and place the two GPU card FPC interposer boards on the system board.
22. For systems shipped with a GPU card, align and place the GPU card FPC from the system board.
23. For systems shipped with a GPU card, replace the four (M1.4x4) T5 Torx screws to secure the GPU card FPC in place.
Next steps
1. Install the heatsink.
2. Install the right fan.
3. Install the left fan.
4. Install the Battery.
5. Install the VPU card, for systems shipped with a VPU card.
6. Install the M.2 solid-state
7. Install the base cover.
8. Install the SD card.
9. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the M.2 solid-state
5. Remove the VPU card, for systems shipped with a VPU card.
6. Remove the Battery.
7. Remove the left fan.
8. Remove the right fan.
9. Remove the heatsink.
10. Remove the system board.
About this task
CAUTION: The information in this removal section is intended for authorized service technicians only.
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
drive, for systems shipped with a solid-state drive.
After working inside your
Before working inside your
drive, for systems shipped with a solid-state drive.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
97