Sd-Kaartlezer; Removing Sd Card Reader - Dell Precision 7750 Service Manual

Steps
1. Place the touchpad buttons into its slot in the palmrest.
2. Replace the two (M2x2.5) screws to secure the touchpad buttons to the palmrest
3. Connect the touchpad buttons cable to the connector in the touchpad.
4. For models shipped with smart card reader, connect the smart card reader cable to the USH daughter board and adhere the smart
card reader cable on the touchpad.
Next steps
1. Install the inner frame.
2. Install the WLAN card.
3. Install the WWAN card.
4. Install the primary M.2 SSD.
5. Install the battery.
6. Install the base cover.
7. Install the SD card.
8. Follow the procedure in

SD-kaartlezer

Removing SD card reader

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the primary M.2
6. Remove the WWAN card.
7. Remove the WLAN card.
8. Remove the inner frame.
after working inside your computer.
before working inside your
SSD.
computer.
Demonteren en hermonteren 55