NOTE:
4. Remove the four (M1.6x4.5) screws that secure the GPU card bridge in place.
5. Remove the GPU card bridge from the system board.
6. Remove the two (M2x4) screws that secure the PC bridge bracket in place.
7. Remove the PC bridge bracket from the system board.
8. Remove the two (M2x4) screws that secure the GPU card in place.
9. Remove the GPU card from the system board.
Installing the GPU card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
CAUTION:
The information in this installation section is intended for authorized service technicians only.
NOTE:
The following procedure is applicable for systems shipped with a GPU card only.
The following image indicates the location of the GPU card and provides a visual representation of the installation procedure.
80
Removing and installing Field Replaceable Units (FRUs)