Behaviour In The Event Of Hazardous Situations Or Accidents - Trox Technik X-CUBE X2 compact 2 Transport And Installation Manual

Crushing hazard.
WARNING!
Crushing hazard from movable parts!
There is an increased risk of crushing on casing
units, doors, panels and components of the device.
– Never reach between moving parts.
– Be careful when carrying out any work.
– Wear protective gloves, safety shoes and a hard
hat.
Inspection access doors slamming shut
WARNING!
Risk of crushing from doors slamming shut
Inspection access doors may slam shut by the wind
or if someone pushes them inadvertently, resulting in
serious injury to the head and limbs.
– Secure each inspection access door with a hold
open device.
– Secure inspection access doors without a hold
open device against closing by suitable means.
– Do not reach between the door and door frame.
– Wear protective gloves and a hard hat when you
open an inspection access door.
2.3.2 Behaviour in the event of hazardous
situations or accidents
Preventive measures
Always be prepared for accidents or fire!

Keep first aid equipment (first aid kit, blankets, etc.)

and fire extinguishers close at hand.
Familiarise personnel with accident reporting, first

aid and rescue equipment.
Keep access paths for rescue vehicles clear.

Measures in the event of accidents
Trigger an emergency stop immediately, and put the

isolator into the "0" position if necessary.
Implement first aid measures.

Rescue individuals from the hazardous area.

Inform the responsible person at the operation site.

Notify the emergency services.

Clear access paths for rescue vehicles.

Personal protective equipment > Behaviour in the event of hazardous situations...
Air handling unit X-CUBE X2 compact 2
Safety
11