Channel Settings - MOTU 828 User Manual

CHANNEL SETTINGS

1
13
12
11
10
Click any of the items at the top of a
channel strip (items #1, 2 or 3 on
page 49) to access the Channel Settings
shown here.
1. The Channel Settings Sidebar
displays basic settings for the
channel.
2. The Next/Previous Channel buttons
display the settings for adjacent
channels in the mix.
3. Click the Channel Name to rename
the channel.
50
2
9 8
4. Drag the Frequency/Gain handle for
an EQ band to change the frequency
and/or gain for the band.
5. Drag the Q (bandwidth) handles for
an EQ band to change them. The
handles are color-coded to match
the color of their respective EQ band.
6. Enables (or disables) the EQ band.
7. Click the Notch/Shelf switch to
toggle the filter type.
14
3 4 5
8. Click filter settings to edit them
directly. See "Multi-band parametric
EQ" on page 51.
9. Click the Notch/Shelf/Low-cut
button to change the filter type.
10. Basic channel settings (gain, pan,
solo, mute and level meter) are
shown here for convenience.
11. Click to access the Compressor and
Gate.
15
6
7
12. Click to access the Parametric EQ
settings.
13. The Stereo Link button links or
unlinks the channel to an adjacent
channel for stereo pairing.
14. The Gate processor is available on
Mic inputs 1 and 2 only. See "Gate"
on page 52.
15. The Compressor is available on all
analog inputs. See "Compressor" on
page 52.
C U E M I X 5