MOTU 828 User Manual page 70

Line In
Connector Type
Specification
Impedance Load
Dynamic Range
THD+N
Frequency Response
Max Level In
Gain Range
Line Out
Connector Type
Output Impedance
Dynamic Range
THD+N
Frequency Response
Max Level Out
Trim Range
Phones
Connector Type
Output Impedance
Dynamic Range
THD+N
Frequency Response
Trim Range
Max output
70
1/4" Female, TRS
Complies with EBU-R68 / SMPTE RP-155
20 k ohm
120 dB
-114 dB
±0.05 dB, 20 Hz-20 kHz
+21 dBu
0 to +20 dB
1/4" Female, TRS
220 ohm
125 dB
-114 dB
+0.01/-0.15 dB, 20 Hz-20 kHz
+21 dBu
0 to -∞ (-127)
1/4" Female, TRS Stereo
< 1 ohm
118 dB
-110 dB
+0.01/-0.1 dB, 22 Hz-20 kHz
0 to -99 dB, plus mute
14.4 dBu
A P P E N D I X B : A U D I O S P E C I F I C A T I O N S
Balanced/unbalanced, Tip hot
balanced
A-weighted
1kHz, 20dBu, 0dB Trim, unweighted
Ref. 1 kHz
Digitally controlled in 1 dB steps
Balanced, tip hot
Per leg
A-weighted
-1 dBFS, Unweighted, 1 kHz
Ref. 1 kHz
Digitally controlled in 1 dB steps
Tip Left, Ring Right
Unweighted, -1 dBFs, 1 kHz
Ref. 1 kHz
0 to -99 dB in 1 dB steps
Unloaded