Discovery Tab - MOTU 828 User Manual

DISCOVERY TAB

7
Click Discovery in the CueMix 5 side bar
(item #15 on page 42) to access the
Discovery tab, which allows you to
access any available MOTU Gen 5 devices
(such as the UltraLite-mk5 and 828)
connected to your host computer, or any
MOTU Gen 5 devices on your local area
network (LAN) via Ethernet or Wi-Fi.
1. The Available Devices list displays
Any MOTU devices that are
connected to the computer you are
running CueMix 5 on, or any devices
connected to a computer on the
same Ethernet/Wi-Fi network. Click
any device in the list to view its
settings in CueMix 5. CueMix can
only access one device at a time, so
use this tab to switch between
multiple devices, if you have them.
You can freely switch devices at any
time. Note that if any of the devices
are password-protected (see
C U E M I X 5
1
below), you do not need to log out 2. This menu provides access to the
to switch to another device. You can
stay logged in while switching to
3. Connect to IP address lets you
and from a password-protected
device.
IMPORTANT NOTE: if you are using
your MOTU Gen 5 device with a
computer that is on a network,
4. Connect to virtual 828 lets you work
security can be an issue. You can
assign a password to your 828
hardware to prevent unauthorized
access to its settings. You can also
control whether it is visible on the
network, and you can give it a name
for easy identification. See items 10,
11 and 12 on page 43.
ALSO NOTE: to access a MOTU device
connected to another computer on
the network, CueMix 5 must be
installed on the computer.
5. Connect to virtual UltraLite-mk5 is
menu items shown below.
connect directly to a MOTU device by
entering its IP address on the
network. You can then view all of its 6. If you have password-protected
settings in the other CueMix 5 tabs.
with CueMix 5 off line, when no 828
hardware is accessible or available
(i.e. there is no 828 present in the list
of available devices). You can look at
all CueMix 5 settings and create and
save presets off line. You can then
load presets into the hardware, once
it is back on line. 7. Click this Back button to return to the
2
3
4
5
6
the same as above for the 828: it lets
you work with CueMix 5 settings for
the UltraLite-mk5 when the
hardware is off line.
multiple MOTU Gen 5 devices for
security purposes while operating
them on a network, choose Log out
of all devices to prevent unautho-
rized access from the computer on
which you were logged in. To log out
of an individual device, switch to
that device and use Log out of Device
(item #14 on page 42).
other CueMix 5 tabs for the currently
selected device.
55