Hdx-Sdi Video Settings - MOTU HDX-SDI User Manual

most closely matches the settings you need. You
can adjust settings further using the Settings tab
(General tab in 5.0) and Tracks tab.
Custom settings
You can further adjust project settings or even
create your own custom sequence presets to suit
your workflow. Click the Settings tab (Figure 7-5)
to further configure your settings. (This is the
General tab in version 5.0.) Always be sure,
however, to choose a MOTU PCI video preset from
the Editing Mode menu. This ensures that you will
be able to play video via the HDX-SDI hardware.
For information about other custom settings,
consult your Premiere Pro documentation.

HDX-SDI VIDEO SETTINGS

Once the HDX-SDI hardware has been configured
by the Premiere Pro settings you made in the
previous section, open the MOTU Video Console
Figure 7-4: Sequence presets.
A D O B E P R E M I E R E P R O
application (Figure 6-1 on page 35) to view the
HDX-SDI's hardware settings and make any
adjustments, if necessary, as explained in the
following sections.
Basic hardware settings
Check the three basic hardware settings:
"Video format" on page 36
■
"Input Source" on page 36
■
"Capture Clock Source" on page 38
■
"Playback Clock Source" on page 38
■
Input/capture settings
To access the HDX-SDI's capture settings, click the
Setup tab (Figure 6-4 on page 37) and Preview tab
(Figure 6-10 on page 42).
47