Degritter MARK II User Manual page 44

11 Troubleshooting guide
Fans are on after program
has finished
Display upside down
Display has scrambled
sections
Machine is starting
programs automatically
Warning: Add Water
44
Fans are on after
program has finished
The machine monitors the tem-
perature of its internals. Once the
temperature exceeds 28 °C or 83 °F,
the machine will cool itself to better
prepare for the next washing cycle,
even while in idle mode. The fans
will stop automatically when the
temperature has been sufficiently
lowered.
Display upside down
The issue is caused by a rare glitch
in the software. Restarting the unit
will solve it.
Display has scrambled
sections
During the machine's transport, sec-
tions of its memory may have been
exposed to strong electromagnetic
interference. Flashing the software
again from the SD card will solve
the issue.
Machine is starting
programs automatically
An automated testing program has
been accidentally enabled from the
menu. Turning the machine off from
the switch on the back, waiting 10s
for the capacitors to discharge and
turning the machine back on again
will disable this function.