Table of Contents
Advertisement
11
Troubleshooting guide
Is the Ultrasonic Cleaning
working?
Machine is leaking water
34
NOTE
Most recent troubleshooting guide
recommendations can be found on
Degritter's website degritter.com.
Is Ultrasonic Cleaning
working?
The ultrasonic cleaning in Degritter
machines can normally be detect-
ed by an accompanying hissing
sound that resembles white noise.
This is best heard during the Degas
program when the machine turns
ultrasonic cleaning on and off with
about 7-10s intervals.
If there is doubt that Degritter's
ultrasonic cleaning is not working
properly, then the following char-
acteristics of the machine can be
checked.
Temperature must rise
Ultrasonic cleaning in Degritter
uses about 300W of power. A large
portion of this will eventually be
converted to heat and when ultra-
sonic cleaning is working properly,
the machine will heat up during use.
If the machine is working properly,
then during a 4 revolution cycle the
water temperature visible on the
display will rise above 30 °C (86 °F).
If the temperature in the machine
does not rise or if the machine
has very low power consumption,
contact support@degritter.com.
Advertisement
Table of Contents
