Degritter MARK II User Manual page 25

TWO TANK RINSE WASH
Press the right button to enable or
disable the two tank rinse wash
function.
When the Rinse wash option is
enabled, the machine will use a
separate water tank for rinsing the
records after every washing cycle.
In order to do so, the user has to
have two water tanks and the user
will have to swap the water tanks
manually.
1 2
The machine will prompt a message
to insert the rinse water tank once
the washing program has finished.
Once the water tank has been
swapped, the program will continue
automatically.
1 2
NOTE
A few drops of water may escape
when swapping water tanks. As a
precaution we recommend using the
machine on a waterproof surface
when a rinse tank is used.
FILTER RUNS COUNTER
Press the right button to reset the
filter runs to 0.
The machine will prompt a reminder
to clean the filter after every 50
washing cycles. The reminder is
automatic and will be prompted
based on the Filter runs counter,
visible in the settings menu, at 50,
100, 150, 200 ... runs.
In order for the reminder to work
properly, the number of washing
cycles on the filter will have to be
reset every time the filter is cleaned.
121
25