Degritter MARK II User Manual page 26

07 Settings menu
FAN POWER
To adjust the fan power setting,
press the button on the right - this
starts the fans and the configura-
tion. Now rotate the button on the
right to adjust fan power. Press the
button on the right again to save
your desired fan power value.
Less power means less audible
noise, but it also dictates a longer
drying time and vice versa.
Fan power
CURRENT
FAN SPEED
26
WATER LEVEL
The water level setting allows you to
change the water level in the ultra-
sonic tank. Press the right button to
switch between water level settings.
For cleaning 12" records it is recom-
mended to use a medium water
level setting.
The low water level setting is fur-
thest from the record label, but
with this setting the water level is
closer to the filtration intake. On
rare occasions using this setting
can cause more foaming in the
machine.
Degritter comes packaged with a
color coded measurement strip.
With it you can measure the dis-
tance from the edge of your record
to the desired water level setting.
Water level
12"
CURRENT
MEDIUM
WATER
LEVEL
WATER
LEVEL
INDIcation